Apple is testing the slim camera bump design for the base model iPhone 16

Apple is testing the slim camera bump design for the base model iPhone 16

Over the past few months, Apple has been experimenting with different camera designs for the standard iPhone 16 phones. We profiled three of Apple’s prototype designs back in December, but now Apple has shifted its focus again.

Camera viewfinders for iPhone 16 2 colors

Apple’s latest prototype features a vertical camera arrangement with a raised, pill-shaped surface, and we’ve created a series of mockups based on the interiors to help readers visualize the change.

The pill-shaped camera bump features two separate rings for the wide and ultra-wide cameras, adopting some stylistic cues from previous prototype designs. The vertical camera arrangement remained constant throughout the prototype build, and Apple did not change the position of the flash or camera lenses with this latest update.

iPhone 16 camera aids 2 perspective

Our results are consistent with recent charts Shared by Majin Bu On social media site X. Bu’s leaked images also feature the same updated design.

The latest camera look that Apple is experimenting with is inspired by older iPhone models, such as the ‌iPhone‌ While Apple used a vertical camera for the iPhone‌ 12 as well, it had a wider, square notch that also housed the flash and microphone.

With the vertical camera layout, we expect Apple to bring spatial video recording to the ‌iPhone 16‌ and iPhone 16‌ Plus base models. Currently, the iPhone 15 models feature a diagonal camera arrangement and cannot capture spatial video, a feature so far limited to the iPhone 15 Pro models and the Vision Pro headset itself.

Aside from the updated camera bump design, the latest ‌iPhone 16‌ prototypes include minor tweaks to the action button and capture button, as we previously reported. The latest prototype units feature a smaller action button, similar to the one used on the ‌iPhone 15 Pro‌, along with a pressure-sensitive capture button that fits into the device’s frame. While the camera bump design is largely a cosmetic update affecting the glass back panel, the change made to the action button during the prototype phase is more significant. Apple updates indicate that it has scrapped its initial idea of ​​bringing the capacitive action button to the ‌iPhone 16‌ range.

Note that what we’ve shared here comes from pre-production information, and may not ultimately reflect the design of the final mass production units that will be released this fall. As we’ve seen with previous ‌iPhone‌ models, Apple creates multiple designs and hardware configurations as part of the development process, and the ‌iPhone 16‌ range is no exception. More concrete information will be revealed as the devices approach the EVT (Engineering Validation Test) phase of development.

For additional details on what to expect, check out our dedicated iPhone 16 and iPhone 16 Pro rumor roundup pages.

(Tags for translation)Featured

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *